Why more and more people choose aluminum cladding to decorate interior and exterior?

There are many kind of building decoration materials on the market right now.Many people will pay more attention to the interior decoration effect when they decorating their house.So this is require us to choose a suitable decoration materials to ensure the overall decoration effect of the interior.It can also create a comfortable environment for our family.Aluminum Cladding is one of the best choose.What is aluminum cladding?What are the characteristics of aluminum cladding?Let`s find out the knowledge about the aluminum cladding.

What is aluminum cladding?

Aluminum cladding refers to the raw material processing, polishing, flipping and other processing,then using fluorocarbon spraying line through three ways and two baking technology to form a new building decoration material.

Fluorocarbon coating mainly refers to polywoven fluoroethylene resin (Kanar500), divided into primer, top paint, varnish three, spraying process is generally divided into two coating, three coating, four coating.

Fluorocarbon coating has excellent corrosion resistance and weather resistance, acid rain, salt spray and all kinds of air pollutants, cold and hot resistance performance is excellent, can resist strong ultraviolet radiation, can maintain for a long time do not fade, not powder, long service life.

What are the characteristics of aluminum cladding?

Aluminum cladding can be recycled, beneficial to environmental protection. Aluminum cladding can be 100% recycled, different from glass, stone, ceramic, aluminum plastic plate and other decorative materials, the recycling residual value is high.

1, Light weight, good steel, high strength,3.0mm thick aluminum cladding weighs 8kg per square plate, tensile strength 100-280n/mm2

2. Good durability and corrosion resistance. Using KyNA-500, HyLUR500 as the base material PVDF fluorocarbons paint, can be used for 25 years without fading.

3. Good technology. Using spray painting process after processing first, aluminum cladding can be processed into plane, arc and spherical all kinds of complicated geometry.

4. Uniform coating, color diversity. Advanced electrostatic spraying technology makes the paint and aluminum plate adhesion uniform, diverse colors, you can choose many different kind of color.

5. Not easy to stain, easy to clean and maintain. Fluorine coating film non-adhesion, so that the surface is difficult to adhere to pollutants, has good cleaning property.

6. Convenient installation and construction. Aluminum molding in the factory, construction site without cutting, can be fixed on the frame.

How to install the aluminum cladding?

Aluminum cladding installation Method 1:

Laying out line → fixed skeleton connector → fixed skeleton → aluminum cladding installation → closing structure treatment → test laying out line → fixed skeleton connector → fixed skeleton → aluminum cladding installation → closing structure treatment → inspection

How to install aluminum cladding ceiling?

1.Lay out the line, fix the skeleton, and bounce the position of the skeleton onto the base. The skeleton is fixed on the main structure. Check the quality of the main structure before laying out the line.

2.The connecting part of the fixed skeleton is welded and connected to the fixed skeleton on the column of the main structure

3.Fixed skeleton, skeleton pre-corrosion treatment. The installation frame position is accurate and the combination is firm. Check the center line and surface elevation after installation. In order to ensure the installation accuracy of the plate, it is advisable to connect the beam mullion rod with theodolite. The deformation joints, settlement joints, variable section and so on are properly handled to meet the requirements of use.

4. Installation of aluminum cladding: the installation and fixing of aluminum cladding should be reliable, simple and easy to do.

How to install the aluminum cladding curtain wall:

1. Transport aluminum cladding and accessories to each construction site

2. Use detergent to clean the interior side of the aluminum cladding and the surface of the column frame

3. The whole aluminum cladding is connected with the keel through the aluminum corner code around and fixed on the keel. The fixing method is internal seamless stitching to produce sunken horn yards, the first plate is fixed on the keel around, the second plate is stuck on the back of the first piece and then fixed on three sides. If it is a plate with glue seam outside, it can be fixed on the keel directly through the conventional aluminum corner code with a rigid tail screw.

4. Pay attention to the installation accuracy control, tighten after adjusting the direction of the plate.

5. When installing aluminum cladding, install them on the wall in sequence according to the aluminum cladding numbers.

6. Aluminum cladding installation is from the front, large area, corner position, from the top down installation principle.

7. The connection between the aluminum cladding and the keel should meet the requirements of the drawings, and should be firm and reliable. Bolts must be installed.

8. The Angle of curtain wall, the surrounding wall, the connection structure of upper and lower sealing and the treatment of deformation joints should meet the design requirements.

The production advantages of our company:

The enterprise operates in accordance with the ISO9001 quality management and quality assurance system, very strict quality inspection has been conducted at each production process. At the same time, we have established a special testing laboratory,with advanced inspection & testing equipment and professional testing personnel, in accordance with the standard of U.S. Construction Manufacturers Association (AAMA2605-98 standard) on the metal coating requirements, we are able to conduct quality inspectionand testing on all items, such as: 1. Coating thickness test, 2. Color variance test, 3. Adhesion square test, 4. Pencil hardness test, 5. Solvent resistance test, 6. Impact resistance test, 7. Glossiness test, all indexes of the coating layer produced by the company are in line with the requirements of AAMA2605-98 standard from U.S. Construction Manufacturers Association.

Our factory selects high-quality fluorocarbon coatings from world-renowned fluorocarbon coating manufacturers PPG, DNT, AKZO, NIPPON and other companies, and has a wide selection of colors. Customers can directly select or provide color sample customization according to the color board provided by the manufacturer.

aluminum honeycomb panels application:

Aluminum cladding curtain wall is suitable for all kinds of building interior and exterior walls, lobby facade, column decoration, elevated corridor, pedestrian bridge, elevator wrap, balcony packaging, advertising signs, indoor special-shaped ceiling decoration and so on. Building exterior wall, beams and columns, balconies, awning airport, station, hospital conference hall, Opera house stadium, reception hall and other high-rise buildings.